Box Rail Door Hanger Hardware Kit

Brackets and hangers for box rail.

Brackets and hangers for 1 door.

Product number Roller TypePackaging format
Axle (Bushing)Box
Ball BearingPer unit

REQUIRED PRODUCTS

Requires ONE of the following products

Length of 6 linear foot
OR
Length of 8 linear foot
OR
Length of 10 linear foot
OR
Length of 12 linear foot

TECHNICAL SPECIFICATIONS

Product number 24651386XB
Type of Door Aluminum/Metal Frame, Wood
Door Position In Front of Wall
Track Mounting Wall Front Using Brackets
Adjustable Yes
Door Mounting Method Drill
Roller Position Upper
Door Thickness 1 1/2 to 3 1/2 in
Rail Material Steel
Rail Finish Galvanized
Number of Doors 1
Weight Capacity per Door Max. 450 lb
Rail Length 72 to 144 in
Finish Zinc Plated
System Heavy Load (150 kg+)
Groove Needed for Guiding System No
Product Type Hardware Set
Rail Type Single Rail
Material Steel
Brand Onward
Screws Included

ADVANTAGES AND BENEFITS

Vertical adjustment is made by turning the lock nut on the top of the hanger with a wrench.
Lateral adjustment is made through the slot in the apron.

APPLICATION

Garage, sliding barn door, industrial door track.

INCLUDED PRODUCT(S)

- 4 side mounting rail brackets with lag bolts.
- 2 double axle hangers for box rail.

IMPORTANT INFORMATION

Place the brackets to ensure uniform distribution of door weight with a minimum distance of 3" from the ends.
If door panels are more than 16' wide, use 3 brackets per panel.

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the right fasteners for your materials.
Never use any spray lubricant on these products.

DISCLAIMER

The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Box Rail Door Hanger Hardware Kit

Product number: 24651386XB

Box