Single Galvanized Steel Box Rail Splice Bracket with Clamp Screws for Wall Mount

Joins two rails to the side of the building

Designed to join two rails, end to end, and holds it in place with the screw included. Wall mounting is designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place.

Product number

24651072GAV

TECHNICAL SPECIFICATIONS

Product number 24651072GAV
Product Type Single Wall Bracket
Track Mounting Wall Front
Set Screws Included Yes
Material Steel
Door Mounting Method Screw
Door Thickness 1 1/2 to 3 1/2 in
Finish Galvanized
Height 4 1/2 in
Width 2 1/4 in
Length 2 in

APPLICATION

Garage, sliding barn, industrial door

INCLUDED PRODUCT(S)

Lag bolts included.

IMPORTANT INFORMATION

Recommended spacing is 2 feet on centers and at all track joints.

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the right fasteners for your materials.
Never use any spray lubricant on these products.

DISCLAIMER

The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Single Galvanized Steel Box Rail Splice Bracket with Clamp Screws for Wall Mount

Product number: 24651072GAV

Bag