The Arrow Kit - 24600890

Wood-door single-roller hardware set

Product number : 24600890
+   -

Requires the following products

Requires one of the following products

Sold without rails to offer more possibilities, this set will work with any one of the three lengths of rail (sold separately). Each rail is pre-drilled to allow for connections to other rails and for bumper installation.

Type of Door Wood
Door Thickness 1 3/8 to 1 3/4 in
Weight Capacity per Door 15 to 100 kg
Our Divisions Onward
Finish/ Color Black
Displayed in These Showrooms Montreal
Door Position In Front of Wall
Track Mounting Wall Front Using Brackets
Design Intent Closet & Walk-In Closet, Standard Access Door
Door Mounting Method Drill
Roller Position Upper
Soft-Close Type Both Ends Operation
Door Width 24 to 60 in
Rail Material Stainless Steel
Rail Finish Black
Number of Doors 1
Roller Type Ball Bearing
Rail Length 2 to 3 m
Soft-Close Mechanism Available, Sold Separately
Material Steel
Operation Single Sliding
Packaging format Box

Suggested products

Included Product(s)

- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door.


Disclaimer: The above information and our technical advice on the implementation given in writing, verbally or in the form of tests is for information purposes only and is not contractual. This advice does not relieve you of the responsibility to verify the accuracy of data and the applicability of products to the intended purpose.

The application, use and processing of our products and the realization of your projects under our technical recommendations are beyond our control and therefore at your own risk. The sale of our products is subject to our Terms of Sale that are in force. Please note that Richelieu will refuse any return or claim for a non-packaged product.

Advantages and benefits

The rails are available in three different lengths allowing you to install two doors side-to-side. Rails are pre-drilled to allow you to connect them end-to-end using the connector kit. Each roller unit is equipped with an anti-derailment device that prevents derailment when the door is mishandled.

Important Information

Note: Picture for visual reference only. Actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use instructions inside the manufacturer-provided packaging.

Manufacturer reserves the right to make technical changes and modify information without prior notice. All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents. Never use an aerosol lubricant on this product. No responsibility is assumed for design details relating to the construction or project.

Job execution or installation must be done by qualified persons. Never exceed manufacturer-recommended load or dimensions. Ensure product is correctly installed using anchors that are appropriate for the material. Always use a soft dry cloth to remove dust, debris, wood and/or aluminum filings from the rail before installing the rollers.

Recently viewed products