The Cavalier Kit - 24600790
Wood-door double-roller hardware kit
Sold without rails to offer more possibilities, this set will work with any one of the three lengths of rail (sold separately). Each rail is pre-drilled to allow for connections to other rails and for bumper installation.
|Type of Door||Wood|
|Door Thickness||1 3/8 to 1 3/4 in|
|Weight Capacity per Door||15 to 100 kg|
|Rail Length||2 to 3 m|
|Door Position||In Front of Wall|
|Soft-Close Mechanism||Available, Sold Separately|
|Soft-Close Type||Both Ends Operation|
|Track Mounting||Wall Front Using Brackets|
|Displayed in These Showrooms||Montreal|
|Design Intent||Closet & Walk-In Closet, Pantry, Storage, Standard Access Door|
|Door Mounting Method||Screw|
|Door Width||24 to 60 in|
|Number of Doors||1|
|Roller Type||Ball Bearing|
- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door.
Disclaimer: The above information and our technical advice on the implementation given in writing, verbally or in the form of tests is for information purposes only and is not contractual.
This advice does not relieve you of the responsibility to verify the accuracy of the data and the applicability of products for the intended purpose.
The application, use and processing of our products and the realization of your projects under our technical recommendations are beyond our control and are therefore entirely at your own risk.
Manufacturer reserves the right to modify the product and information relating to that product without prior notice.
The sale of our products is subject to our Terms of Sale. Please note that Richelieu will refuse any return or claim for a non-packaged product.
Advantages and benefits
This kit will work any one of the three lengths of rail which are sold separately. Each rail is pre-drilled to allow for connection to other rails and for soft close installation.
Security: Each roller is equipped with an anti-derailment unit to prevent derailment when the door is misused.
Note: Picture for visual reference only. Actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. It is preferable to use instructions inside the manufacturer-provided packaging as manufacturer reserves the right to make technical changes and modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project. Job execution or installation must be done by qualified persons.
Ensure that product is correctly installed and anchored using anchors that are appropriate tyo the material. Never exceed manufacturer-recommended dimensions or weight. Never use an aerosol lubricant on this product.
Always use a soft dry cloth remove debris / dust / filings (wood and/or aluminum) from the rail before installing the rollers.