STUDIO Sliding Door Set for Wooden Door (Soft Close Included) with Track - 2460102SSPVC
Soft close system at both ends.
This complete set with visible stainless steel hardware ensures easy installation of a standard wooden door, available in hardware store.
|Finish/ Color||Stainless Steel|
|Type of Door||Wood|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front Using Brackets|
|Design Intent||Closet & Walk-In Closet, Standard Access Door|
|Door Mounting Method||Screw|
|Soft-Close Type||Both Ends Operation|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Width||24 to 36 in|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel|
|Number of Doors||1|
|Weight Capacity per Door||15 to 80 kg|
|Roller Type||Ball Bearing|
|Rail Length||2 m|
|Rail Type||25 mm Tubing|
|Groove Depth||20 mm|
|Groove Needed for Guiding System||No|
|Groove Width at the Bottom of Door||7 mm|
2 one-meter rails (tube)
2 single roller supports
2 integrated soft-close units
2 activators (also used as anti-derailment)
4 wall mounting brackets
1 central flange for wall mount
1 door bottom guide
Screws are included
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.
Advantages and benefits
Integrated soft close system at both ends.
Ball bearings for easy movement.
Security: The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.
Interior access door
Door handles and door not included. It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door opening to avoid angled views and preserve privacy. It is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system. Misuse and / or excessive clamping force may damage or break the damping system. Preparation: Remove the frame mouldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure the release of the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris / dust / residues (sawdust and / or aluminum) from rails before installing hangers.