The Rustic Kit - 24600590
Visible Hardware Kit for a Wood Door
This kit will work with any one of the three lengths of rail (sold separately).
Each rail is pre-drilled to allow for connections to other rails and for softclose mechanisme installation.(sold separately)
|Type of Door||Wood|
|Rail Length||2 to 3 m|
|Door Thickness||1 3/8 to 1 3/4 in|
|Weight Capacity per Door||15 to 100 kg|
|Soft-Close Mechanism||Available, Sold Separately|
|Displayed in These Showrooms||Montreal|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front Using Brackets|
|Design Intent||Closet & Walk-In Closet, Standard Access Door|
|Door Mounting Method||Drill|
|Soft-Close Type||Both Ends Operation|
|Door Width||24 to 60 in|
|Number of Doors||1|
|Roller Type||Ball Bearing|
|Groove Needed for Guiding System||Yes|
|Rail Type||Flat Bar|
|Groove Width at the Bottom of Door||5 to 7 mm|
|Groove Depth||20 mm|
Adjustable Lower Guide for Wood Door, Stainless Steel
Black Plastic Guide for Wood Door
Lower Guide for Wood Door, Side-Mount, Adjustable, Stainless Steel
Handle with Knob for Wood Door
Soft-Close Mechanism for Sliding Door
Wall mount bracket for bypass door
Barn Door Single Pull
Barn Door Handle with Knob
Barn Door Handle, Back-to-Back Rustic Style
- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide with screws for wood door.
Disclaimer: The above information and our technical advice on the implementation given in writing, verbally or in the form of tests is for information purposes only and is not contractual.
This advice does not relieve you of the responsibility to verify the accuracy of the data and the applicability of products for the intended purpose.
The application, use and processing of our products and the realization of your projects under our technical recommendations are beyond our control and are therefore entirely at your own risk.
The manufacturer reserves the right to modify the product and information relating to that product without prior notice.
The sale of our products is subject to our Terms of Sale. Please note that Richelieu will refuse any return or claim for a non-packaged product.
Advantages and benefits
The rails are available in three different lengths allowing you to install two doors side-to-side.
The rails are pre-drilled to allow you to connect rails end-to-end using the connector kit and to allow installation of end-rail soft close.
Note: Picture for visual reference only. Actual product may differ from that shown in photo. Be sure to order hardware before beginning fabrication or installation work.
Always use instructions inside the manufacturer-provided packaging as manufacturer reserves the right to make technical changes and modify information without prior notice.
The manufacturer reserves the right to modify the product and information relating to that product with prior notice. All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents.
No responsibility is assumed for design details relating to the construction or project. Job execution or installation must be done by qualified persons.
Ensure that product is correctly installed and anchored using anchors that are appropriate tyo the material. Never exceed manufacturer-recommended dimensions or weight. Never use an aerosol lubricant on this product.
Always use a soft dry cloth remove debris, dust and wood/aluminum filings from the rail before installing the rollers.