The Zenitude Kit - 246016170
Hardware for a single sliding door
Kit of visible stainless steel hardware for wood door.
This kit will work with any one of the three lengths of rail. (sold separately).
Each rail is pre-drilled to allow for connections to other rails and for softclose mechanisme installation. (sold separately)
|Finish/ Color||Stainless Steel|
|Rail Length||2 to 3 m|
|Type of Door||Wood|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front Using Brackets|
|Design Intent||Closet & Walk-In Closet, Pantry, Standard Access Door|
|Door Mounting Method||Drill|
|Soft-Close Type||Both Ends Operation|
|Door Width||24 to 60 in|
|Rail Type||Flat Bar|
|Number of Doors||1|
|Weight Capacity per Door||15 to 100 kg|
|Roller Type||Ball Bearing|
|Soft-Close Mechanism||Available, Sold Separately|
|Groove Needed for Guiding System||Yes|
|Groove Width at the Bottom of Door||7 mm|
|Groove Depth||20 mm|
- 2 roller units with mounting screws for 1-3/8" or 1-3/4" door
- 2 end-bumpers with screws
- 2 anti-derailer devices with screws
- 1 floor-level door guide with rews
The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge.
However they are non-binding recommendations only, and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.
Advantages and benefits
Allows you to install two doors on the same rail.
Security: each roller includes a device that prevents derailment when the door is being misused.
Picture for visual reference only: actual product may differ from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. It is preferable to use manufacturer-provided instructions as manufacturer reserves the right to modify information without product and information relating to the product prior notice.
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed maximum weight or manufacturer-recommended maximum weight or dimensions. Never use spray lubricant on this product. Always use a soft dry cloth to remove debris, dust, wood and/or aluminum filings from the rail before installing the rollers.