Rustic Barn Door Wall Mount Sliding Door System for 1 Wood Door
Visible Hardware Kit for a Wood Door
The Rustic Barn Door is a wall mount sliding door system for 1 wood door with visible black flat bar steel looped strap trolley for doors weighing up to 100 kg (220 lb). Select from 3 choices of standard flat bar upper track sets with wall mounts and fastener lag bolts for wood wall construction. Each track is pre-drilled for connectors to join tracks and soft-close mechanisms (sold separately). For residential applications.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Included Product(s)
- Important Information
Requires the following products
|See Number of Doors, Rail Length options|
Requires ONE of the following products
|Displayed in These Showrooms||Montreal, Mississauga|
|Type of Door||Wood|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front|
|Door Mounting Method||Drill|
|Soft-Close Type||Both Ends Operation, Soft-close sold separately|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Width||24 to 60 in|
|Number of Doors||1|
|Weight Capacity per Door||15 to 100 kg|
|Roller Type||Ball Bearing|
|Rail Length||2 to 3 m|
|Soft-Close Mechanism||Available, Sold Separately|
|Rail Type||Flat Bar|
|Groove Needed for Guiding System||Yes|
|Groove Depth||20 mm|
|Groove Width at the Bottom of Door||5 to 7 mm|
- Handles for Sliding Barn Doors
- Sliding Door Guides
- Sliding Door Mounting Brackets
- Recessed and Flush Cup Pulls for Sliding Doors
- Sliding Door Soft-Close Mechanisms
- Sliding Door Mounting Accessories
The rails are pre-drilled to allow you to connect rails end-to-end using the connector kit and to allow installation of end-rail soft close.
- 2 end track stoppers with screws
- 2 anti-derail discs for top of door units with screws
- 1 floor mounted guide with screws
Always use instructions inside the manufacturer-provided packaging as manufacturer reserves the right to make technical changes and modify information without prior notice.
The manufacturer reserves the right to modify the product and information relating to that product with prior notice. All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents.
No responsibility is assumed for design details relating to the construction or project. Job execution or installation must be done by qualified persons.
Ensure that product is correctly installed and anchored to a solid structure using anchors that are appropriate type of material. Never exceed manufacturer-recommended dimensions or weight. Never use an aerosol lubricant on this product.
Always use a soft dry cloth remove debris, dust and wood/aluminum filings from the rail before installing the rollers.