The Classic Barn Door Set

Hardware kit for a single sliding wood door

The Classic Barn Door is a wall mount sliding door system for 1 wood door with visible black flat bar steel top mount trolley for doors weighing up to 80 kg (176 lb). Select from 3 choices of standard flat bar upper track sets with wall mounts and fastener lag bolts for wood wall construction. Each track is pre-drilled for connectors to join tracks and soft-close mechanisms (sold separately). For residential applications.

Product number



Requires ONE of the following products

Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600290
  • Rail Length: 2.5 m
  • Number of Doors: 2 / 1
Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600390
  • Rail Length: 3 m
  • Number of Doors: 2 / 1


Product number 24600690
Program R-Space
Track Mounting Wall Front
Function Standard Sliding
Type of Door Wood
Style Rustic
Finish/Color Black
Weight Capacity per Door 15 to 80 kg
Material Steel
Groove Needed for Guiding System Yes
Groove Width at the Bottom of Door 7 mm
Groove Depth 20 mm
Door Position In Front of Wall
Number of Doors 1
Door Width 24 to 60 in
Door Thickness 1 3/8 to 1 3/4 in
Roller Type Ball Bearing
Roller Position Upper
Rail Type Flat Bar
Rail Length 2 to 3 m
Soft-Close Type Both Ends Operation
Soft-Close Mechanism Available, Sold Separately
Door Mounting Method Screw
Brand Onward


The rails are available in three different lengths allowing you to install two doors side-to-side. Rails are pre-drilled to allow you to connect them end-to-end using the connector kit and to allow installation of end-rail bumpers.

Security: Each roller is equipped with a device that prevents derailment when the door is being misused.


- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door.


Note: Picture for visual reference only. Actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. It is preferable to use instructions inside the manufacturer-provided packaging.

Manufacturer reserves the right modify the product and information relating to that product without prior notice. All technical drawings and documents contain examples for the assembly of different supplier hardware. Customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Job execution or installation must be done by qualified persons. Ensure that product is correctly installed and anchored using anchors that are appropriate to the material. Never exceed manufacturer-recommended dimensions or weight. Never use an aerosol lubricant on this product. Always use a soft dry cloth to remove dust, debris and wood or aluminum filings from the rail before installing the rollers.


Disclaimer: The above information and our technical advice on the implementation given in writing, verbally or in the form of tests is for information purposes only and is not contractual. This advice does not relieve you of the responsibility to verify the accuracy of the data and the applicability of products for the intended purpose. The application, use and processing of our products and the realization of your projects under our technical recommendations are beyond our control and are therefore entirely your own responsibility. The manufacturer reserves the right to modify the product and information relating to that product without prior notice. The sale of our products is subject to our Terms of Sale. Please note that Richelieu will refuse any return or claim for a non-packaged product.
The Classic Barn Door  Set

Product number: 24600690