The Classic Barn Door Set

Hardware kit for a single sliding door

The Classic Barn Door is a wall mount sliding door system for 1 wood door with visible stainless steel flat bar steel top mount trolley for doors weighing up to 80 kg (176 lb). Select from 3 choices of standard flat bar upper track sets with wall mounts and fastener lag bolts for wood wall construction. Each track is pre-drilled for connectors to join tracks and soft-close mechanisms (sold separately). For residential applications.

Product number

246015170

REQUIRED PRODUCTS

Requires ONE of the following products

Flat Rail, Stainless Steel Product no. 246003170
  • Number of Doors: 2 / 1
  • Rail Length: 3 m
Box
OR
Flat Rail, Stainless Steel Product no. 246011170
  • Number of Doors: 1
  • Rail Length: 2 m
Box
OR
Flat Rail, Stainless Steel Product no. 246012170
  • Number of Doors: 2 / 1
  • Rail Length: 2.5 m
Box

TECHNICAL SPECIFICATIONS

Product number 246015170
Type of Door Wood
Door Position In Front of Wall
Track Mounting Wall Front
Door Mounting Method Screw
Roller Position Upper
Soft-Close Type Both Ends Operation
Door Thickness 1 3/8 to 1 3/4 in
Door Width 24 to 60 in
Number of Doors 1
Weight Capacity per Door 15 to 80 kg
Roller Type Ball Bearing
Rail Length 2 to 3 m
Soft-Close Mechanism Available, Sold Separately
Rail Type Flat Bar
Material Stainless Steel
Brand Onward
Program R-Space
Function Standard Sliding
Style Rustic
Groove Needed for Guiding System Yes
Groove Depth 20 mm
Groove Width at the Bottom of Door 7 mm
Finish/Color Stainless Steel (170)

ADVANTAGES AND BENEFITS

Allows you to install two sets (doors) on the same rail.

Security: The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.

INCLUDED PRODUCT(S)

- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end-bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level door guide with screws

IMPORTANT INFORMATION

Note:
Picture for visual reference only: actual product may vary from that shown in photo.

Be sure to order hardware before beginning fabrication or installation work.

Always use manufacturer-provided instructions as manufacturer reserves the right to make technical changes and modify information without prior notice.

All technical drawings and documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Installation should be undertaken by qualified persons.

Never exceed manufacturer-recommended maximum weight or dimensions.

Ensure product is correctly installed using anchors that are appropriate for the supporting material.

Never use spray lubricant on this product.à

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However they are non-binding recommendations only, and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The Classic Barn Door Set

Product number: 246015170

Box