The Ferris Wheel Kit
Oversize roller hardware kit for wood door
The Ferris Wheel is a hardware set with 2 big 120 mm trolleys/rollers and end track stoppers for wood doors. The hardware set includes all the basic fittings for 1 wood door; see below to view the list of all the components included in the basic hardware set. Sold separately, you may select from 3 different length track sets that include basic wall mounts and fasteners. The tracks are pre-drilled for the wall mounts and for machines to accept connector plates (sold separately) to join tracks. Also the back of the track is machined to accept soft-close mechanisms (sold separately). For residential applications.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Included Product(s)
- Important Information
Requires ONE of the following products
|Type of Door||Wood|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front|
|Door Mounting Method||Drill|
|Soft-Close Type||Both Ends Operation|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Width||24 to 60 in|
|Number of Doors||1|
|Weight Capacity per Door||15 to 100 kg|
|Roller Type||Ball Bearing|
|Rail Length||2 to 3 m|
|Maximum Door Height||2 600 mm|
|Soft-Close Mechanism||Available, Sold Separately|
- Handles for Sliding Barn Doors
- Sliding Door Guides
- Recessed and Flush Cup Pulls for Sliding Doors
- Sliding Door Soft-Close Mechanisms
- Sliding Door Mounting Accessories
Rails are pre-drilled at each end to allow for interconnection with other rails or the installation of soft close.
This kit provides 8 washers (for 3 m rails) to adjust the distance between track and wall and to allow the roller to properly slide on the track.
These washers must be installed only for this model (the "Ferris Wheel" kit).
Please note, if you have a shorter rail, you will need less than 8 washers.
Washer thickness: 6 mm.
Security: Each roller unit is equipped with a device that prevents derailment during rough use of the door.
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door with screws
Manufacturer reserves the right to make technical changes or modify information without prior notice. All technical drawings and documents contain examples for the assembly of different supplier's hardware. Customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.
Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed manufacturer-recommended maximum weight or dimensions. Never use any spray lubricant on these products. Use a dry cloth to remove all fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the roller units.