Decorative Rail Systems
Industrial - Decorative Visible Rail System
Interior Barn Door
The Industrial Barn Door Style sliding door kit with 2.0 m (78") upper track in stainless steel. The kit is made for door thickness of 35 to 45 mm (1 3/8" to 1 3/4"). The lag bolt and pre-drilled track makes for a simple installation
This is an economical product intended for residential light duty use.
Not recommended for high traffic commercial and hotel applications.
Please refer to the ALBERGO series for commercial and hotel applications.
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Included Product(s)
- Important Information
|Track Mounting||Wall Front|
|Type of Door||Wood|
|Finish/Color||Stainless Steel (170)|
|Weight Capacity per Door||15 to 80 kg|
|Groove Needed for Guiding System||No|
|Groove Width at the Bottom of Door||5 to 7 mm|
|Groove Depth||20 mm|
|Door Position||In Front of Wall|
|Number of Doors||1|
|Door Width||24 to 40 in|
|Door Thickness||1 3/8 to 1 3/4 in|
|Roller Type||Ball Bearing|
|Rail Type||25 mm Tubing|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel|
|Rail Length||2 m|
|Door Mounting Method||Screw|
- Handles for Sliding Barn Doors
- Door Retainer
Security: The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.
2 single roller supports
4 wall mounting brackets
1 door bottom guide
Screws are included
Preparation: Remove the moldings or install a piece of wood (not included) of the same length and thickness before setting the new hardware in place. This is to check door clearance. Ensure product is properly anchored/installed using anchors that are appropriate for the supporting material. Extra anchors that may be required are sold separately.
Picture is for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. Customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.
Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed manufacturer-recommended maximum weight or dimensions. Never use spray lubricant on these products. Use a dry cloth to remove all fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the roller units.