Onward Retail Program
The Studio Barn Door Style Kit with integrated soft close and 2.0 m track
Soft close system at both ends.
The STUDIO Barn Door Style sliding door kit with 2 integrated soft close mechanisms and a 2.0 m (78") upper track in stainless steel. The kit is made for door thickness of 35 to 45 mm (1 3/8" to 1 3/4"). The lag bolt and pre-drilled track makes for a simple installation
This is an economical product intended for residential light duty use.
Not recommended for high traffic Commerical and Hotel applications.
Please refer to the ALBERGO series for commercial and hotel applications.
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Included Product(s)
- Important Information
|Type of Door||Wood|
|Door Position||In Front of Wall|
|Track Mounting||Wall Front|
|Door Mounting Method||Screw|
|Soft-Close Type||Both Ends Operation|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Width||24 to 36 in|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel|
|Number of Doors||1|
|Weight Capacity per Door||15 to 80 kg|
|Roller Type||Ball Bearing|
|Rail Length||2 m|
|Rail Type||25 mm Tubing|
|Groove Needed for Guiding System||No|
|Groove Depth||20 mm|
|Groove Width at the Bottom of Door||7 mm|
|Finish/Color||Stainless Steel (170)|
- Sliding Door Guides
- Handles for Sliding Barn Doors
- Sliding Door Stoppers
Ball bearings for easy movement.
Security: The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.
2 single roller supports
2 integrated soft-close units
2 activators (also used as anti-derailment)
4 wall mounting brackets
1 central flange for wall mount
1 door bottom guide
Screws are included
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris / dust / residues (sawdust and / or aluminum) from rails before installing hangers.