Instructions
Series 9997SC Single Extension Ball Bearing Slide with Soft-Close Mechanism - 35 kg Capacity
Product # 9997SCX22B
This soft gliding slide can be used on a variety of applications from kitchen cabinets to dresser drawers.
| Product # | Length |
|---|---|
| 9997SCX22B | 55.9 cm* |
| 9997SCX12B | 305 mm* |
| 9997SCX14B | 356 mm* |
| 9997SCX16B | 406 mm* |
| 9997SCX18B | 45.7 cm* |
| 9997SCX20B | 508 mm* |
| 9997SCX24B | 61 cm* |
ADVANTAGES AND BENEFITS
The soft-close mechanism ensures the automatic closing of the drawer. Its durable mechanism is designed to slow the drawer to a close to prevent slamming. It then pulls the drawer to its final closed position.
TECHNICAL SPECIFICATIONS
Product #
9997SCX22B
Slide Extension
Full Extension
Motion Technology
Soft-Close
Load Capacity
35 kg
Finish
Zinc
Brand
Onward
Slide Mounted
Side Mounted
Bearing Type
Ball Bearing
Material
Steel
Width
45.7 mm
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
To mount into a frameless cabinet:
Separate slide members by depressing the lever release. Install large cabinet members. Check that both cabinet members are vertically and horizontally parallel. Make necessary adjustments. Install drawer member through vertical slots. Adjust position and install two more screws in round holes. Insert drawer part and close completely. Download instructions for illustrations.
Separate slide members by depressing the lever release. Install large cabinet members. Check that both cabinet members are vertically and horizontally parallel. Make necessary adjustments. Install drawer member through vertical slots. Adjust position and install two more screws in round holes. Insert drawer part and close completely. Download instructions for illustrations.
