Line art
Adjustable Drive-In Ball Catch
Product # 5037ABV
Works best with closet and pantry doors
Works best with closet and pantry doors. Adjustable to fit your needs is any design aspect. Easy to install.
Product # | Color/Finish |
---|---|
5037ABV | Antique Brass |
5037ANV | Antique Nickel |
5037FBV | Black |
5037BV | Brass |
5037BCV | Brushed Chrome |
5037NBV | Brushed Nickel |
5037CV | Chrome |
5037ORBV | Oil-Rubbed Bronze |
ADVANTAGES AND BENEFITS
Works best with closet and pantry doors.
TECHNICAL SPECIFICATIONS
Product #
5037ABV
Diameter
1 in
Strike Plate Width
1 13/32 in*
Strike Plate Length
2 1/4 in*
Door Type
Wood
Thickness
1/16 in*
Handing Position / Opening Side
Reversible for Left or Right
Usage
Hinge Door
Height
27/32 in*
Width
27/32 in*
Length
1 5/32 in*
Material
Metal
Screw/Nail
Included
Collection
Door Hardware
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
Mounting screws included.
- Plate: 2 1/4 in (57.10 mm) long, 1 3/8 in (35 mm) wide, 1/32 in (0.79 mm) in gauge
- Ball catch: 1 5/32 in (29 mm) long, for 1 in (25.40 mm) bored hole
- Plate: 2 1/4 in (57.10 mm) long, 1 3/8 in (35 mm) wide, 1/32 in (0.79 mm) in gauge
- Ball catch: 1 5/32 in (29 mm) long, for 1 in (25.40 mm) bored hole
APPLICATION
Step 1: Mark desired location of door. Drill a hole 27/32 in (21.43 mm) in diameter, 1 1/4 in (31.75 mm) deep.
Step 2: Set the body in the hole by pressing down.
Step 3: Ensure strike plate is aligned with ball catch on the door frame.
Step 4: Use mounting hardware provided to tighten strike plate.
Used on doors with dummy knobs or levers to form a secure closure.
Step 2: Set the body in the hole by pressing down.
Step 3: Ensure strike plate is aligned with ball catch on the door frame.
Step 4: Use mounting hardware provided to tighten strike plate.
Used on doors with dummy knobs or levers to form a secure closure.